Agenda Seminarium

Transkrypt

Agenda Seminarium

Program of the 3rd Seminar
„Selected Engineering Problems”
The Seminar will be held on 25th-26th October 2012
in the Education and Congress Centre (CEK) of the Silesian University of Technology
in Gliwice, 18B Konarskiego Street,
/www.cek.polsl.pl/
The first day – 25th October 2012
8:30 - 9:00
Room “A”
Registration of participants
ground floor
9:00 - 10:15
Room “A”
Opening of the Seminar by Professor Arkadiusz Mężyk,
ground floor the Dean of the Faculty of Mechanical Engineering.
Guests welcome by Professor Jerzy Świder,
the Director of the Institute of Engineering Processes Automation
and Integrated Manufacturing Systems.
Guests welcome by Mr. Maciej Zajączkowski,
representative of the HBM company, co-organizer of the Seminar.
Plenary session
Prof. Dumitru Nedelcu, “Gheorghe Asachi” Technical University of Iasi,
Department of Machine Manufacturing Technology, Romania:
Flexural Properties of Samples Obtained from Liquid Wood
Prof. Ivan Gostev, National Research University “High School of
Economic” Moscow, Russia: Using Signature Analysis in Graphic Pattern
Recognition
Prof. Waldemar Świderski, Military Institute of Armament Technology,
Zielonka, Poland: Use of the lock-in IR thermography method for evaluation
of light composite armours
Poster session – part 1 / Coffee break
Chairman of the poster session: Prof. Andrzej Buchacz
10:15 - 10:45
Lobby on
the 2nd floor
of the CEK
10:45 - 12:00
Thematic panels*
Room “F” on Section A:
the 2nd floor Chairmen: Prof. Waldemar Świderski, Prof. Jerzy Świder
Secretary: Agnieszka Sękala, PhD. Eng.
Room “I” on Section B:
the 2nd floor Chairmen: Prof. Dumitru Nedelcu, Prof. Ivan Gostev
Secretary: Katarzyna Białas, PhD. Eng.
Lobby on
Poster session – part 2 / Coffee break
nd
the 2 floor Chairman of the poster session: Prof. Andrzej Buchacz
of the CEK
Room “A”
Presentation of the HBM Company representative – Mr. Dirk Eberlein
ground floor
12:00 - 12:15
12:15 - 13:45
13:45 - 14:30
14:30 - 15:00
15:10
Lobby on
the 2nd floor
of the CEK
Room “J” on
the 2nd floor
Lunch break
Presentation of virtual reality
Social events:
1. Gliwice Radio Station
http://www.radiostacjagliwicka.republika.pl/foldery/Gliwice_Radio_EN.pdf
2. Black Trout Adit in Tarnowskie Góry
http://www.kopalniasrebra.pl/EN/sztolnia/sztolnia.php
/ It is necessary to inform the Organizing Committee during the
registration about willingness to participate, the price is 25PLN /
Approx. 19:00
Friendship meeting – Gliwice
(for information contact with Organizing Committee)
* individual visits in laboratories of the Institute for the HBM company guests during panels
The second day – 26th October 2012
10:00 - 10:15 Room “I” on the
The award ceremony
2nd floor
Workshop conducted by Mr. Dirk Eberlein – representative of the HBM
10:15 - 11:45 Room “I” on the
nd
Company:
2 floor
Fast data acquisition with Genesis Highspeed
Part 1
nd
11:45 - 12:15 Lobby on the 2
Coffee break
floor of the CEK
12:15 - 14:00 Room “I” on the
Workshop conducted by Mr. Dirk Eberlein – representative of the HBM
nd
2 floor
Company:
Fast data acquisition with Genesis Highspeed
Part 2
Presented works
Section A
Chairmen:
Secretary:
Prof. Waldemar Świderski, Prof. Jerzy Świder
Agnieszka Sękala, PhD. Eng.
1. Andrzej Katunin
Institute of Fundamentals of Machinery Design, Faculty of Mechanical Engineering,
Silesian University of Technology, Gliwice, Poland
Reduction of boundary effect during structural damage identification using wavelet transform
2. Marcin Zemczak
Institute of Engineering Process Automation and Integrated Manufacturing Systems,
Computer aided simulation of a multiassortment and multiversion production system
3. Łukasz Maliński, Institute of Automatic Control, Faculty of Automatic Control, Electronics and
Computer Science, Silesian University of Technology, Gliwice, Poland
On difficulties in identification of simple linear-bilinear time-series modules using memetic algorithm
4. Weronika Huss
Institute of Machine Design and Operation, Department of Mechanical Engineering, Wrocław
University of Technology, Wrocław, Poland
A use of statistical tools for identification of bucket wheel excavators' transient vibrations during
random loadings
5. Jan Matyga, Stanisław Kajzer, Magdalena Pająk
GASKET Sp. z o.o. Bielsko Biała, Poland
Intelligent wheel with a polyurethane tread PUGA® for extremely loaded mining suspended queue
6. Piotr Krauze
Institute of Automatic Control, Faculty of Automatic Control, Electronics and Computer Science,
Adaptive tracking of road vehicle engine speed based on acceleration measurements
Section B
Chairmen:
Secretary:
Prof. Dumitru Nedelcu, Prof. Ivan Gostev
Katarzyna Białas, PhD. Eng.
1. Iwona Paprocka
Comparison of estimation methods of reliability characteristics: MTTF and MTTR, numerical example
2. Arkadiusz Mężyk, Edyta Krzystała, Sławomir Kciuk
Department of theoretical and applied mechanics,
Experimental mine blast tests of wheeled military vehicle
3. Krzysztof Jamroziak
Gen. Tadeusz Kościuszko Military Academy of Land Forces, Wrocław, Poland
The identification of degenerate systems described by equations of energy and power balance in the process
of impact energy dissipation
4. Maja Baier, Rafał Bogucki, Andrzej Baier
Reverse engineering as a tool in process of gear reconstruction
5. Piotr Sakiewicz, Ryszard Nowosielski, Katarzyna Cesarz, Wirginia Pilarczyk
Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice,
Poland: Planned obsolescence – today’s engineering dilemma
6. Czesław Pypno
Department of Logistics and Mechanical Handling, Faculty of Transport, Silesian University of
Technology, Katowice, Poland
- Cassette for collecting long sections of conveyor belts and its possibilities of winding
- The drive of a fast moving footway with accelerating segment at entry and the slowing down
segment at exit
Poster session
Chairman: Prof. Andrzej Buchacz
1. Mateusz Cielniak
The automation of manufacturing costs estimation process
2. Teodor Daniel Mîndru, Dumitru Nedelcu
“Gheorghe Asachi” Technical University of Iasi, Department of Machine Manufacturing Technology,
Romania
The influence of input parameters on the flexural strength for parts obtained by injection of
polyamide reinforced with glass fibers and glass microspheres
3. Adrian Kampa
Impact of rapid prototyping techniques for the manufacturing of new product
4. Szymon Krysiak, Magdalena Marek, Łukasz Sikora, Andrzej Baier
The concept of perpetuum mobile – from the past to the present
5. Cărăușu Constantin, Pruteanu Octavian Vasile
“Gheorghe Asachi” Technical University of Iasi, Faculty of Machine Manufacturing and Industrial
Management, Department of Machine Manufacturing Technology, Iasi, Romania
Machining process modeling by cold plastic deformation of the bearing rings
6. Damian Krenczyk
Data-driven modeling and simulation for integration production planning and simulation systems
7. Andrzej Nierychlok
Control of the hybrid wheeled vehicle in the graphical programming environment/software
NI LabVIEW
8. Piotr Saska
Gen. Tadeusz Kościuszko Military Academy of Land Forces, Wrocław, Poland
Analysis of traverse in DMS-65 type assembled bridge loaded by selected wheeled vehicle
9. Robert Czabanowski, Jakub Kuświk
Wrocław University of Technology, Department of Mechanical Engineering, Institute of Machine
Design and Operation, Wrocław, Poland
Interactive system control of overhead crane
10. Krzysztof Drobny, Mariusz Hetmańczyk
Application of the iLogic technology implemented in the Inventor software to the realization of
a parameterized model of a cylindrical gear – rules development
11. Krzysztof Drobny, Mariusz Hetmańczyk
Application of the iLogic Technology implemented in the Inventor software to the realization of a
parameterized model of a cylindrical gear – model design and analysis of work correctness
12. Grzegorz Ćwikła
Interactive 3D presentation as a tool in learning of the technological processes design
13. Piotr Ociepka
Concept of CBR system for computer aided of machines design process
14. Krzysztof Kalinowski, Damian Krenczyk, Cezary Grabowik
Analysis and testing of dimensional accuracy of elements made with use the FDM technology for
prototyping
15. Claudiu Burian
“Gheorghe Asachi” Technical University of Iasi, Faculty of Machine Manufacturing and Industrial
Management, Department of Machine Manufacturing Technology, Iasi, Romania
Comparative Analysis of Non Distructive Methods for Highlighting Defects in Welded Parts
16. Cezary Grabowik, Krzysztof Kalinowski
A review of rapid tooling technologies in technical production preparation – a vacuum casting
practical example
17. Grzegorz Sobota
The Jerzy Kukuczka Academy of Physical Education, Katowice, Poland: Influence of filtering and
sampling on the value of selected stabilographic parameters
18. Klaudiusz Klarecki
Two modelling methods of hydraulic devices using Matlab/Simulink software
19. Aleksander Wziontek, Krzysztof Herbuś,
CAD and VR systems application to create interactive visualization of control process in robotic
system

Agenda Seminarium

Transkrypt

Podobne dokumenty

Aleks.com hacked