- Monday 4 IX –

- Monday 4 IX –
Room A
Chairman - Prof. B. Raniecki, IFTR, Warszawa, (Poland)
8.40 - 9.00 Opening of the Conference
9.00 - 9.50 Opening Lecture
Prof. J.R. Rice - Harvard University, Division of Engineering and Applied
Sciences (USA),
“Heating and weakening of fault zones during earthquake slip”
10.00 - 10. 50 General Lecture
Prof. E. Kreuzer - President of Technical University Hamburg-Harburg
(Germany)
“Dynamics and control of nonlinear mechanical systems”
(Co-authors : A.Bockstedte, Q.H.Nguyen)
10.50 - 11.10 Coffee Brake
- Morning Sectional Sessions Section FDFA - Room A
Chairman - Prof. J. Klepaczko, LPMM - Metz University, (France)
Sectional Lecture
11.10 - 11.40 Prof. T. Wierzbicki - MIT, Department of Ocean Engineering (USA)
“Modeling and solutions for ductile fracture”
Session Lectures:
11.40 - 12.00 Prof. K. Sobczyk - IFTR PAS, Warszawa (Poland)
“Effects of random microstructural stresses on fracture estimation”
(Co-author: J. Trębicki)
12.00 - 12.20 Prof. U. Stigh - University of Skövde, (Sweden)
“On the life-fraction rule and continuum damage mechanics”
12.20 - 12.40 Dr G. Mejak – University of Ljubljana (Slovenia)
“Imperfect bonding with a discontinuous finite interfacial strength”
12.40 - 13.00 J. Kozicki - Gdańsk University of Technology, Faculty for Civil and
Environmental Engineering (Poland)
“Lattice type fracture model for brittle materials”
(Co-author: J. Tejchman)
13.00 – 15. 00 Lunch
Section EPOF - Room B
Chairman – Prof. P. Perzyna, IFTR, Warszawa, (Poland)
Sectional Lecture
11.10 - 11.40 Prof. O.Bruhns - Ruhr-University Bochum, Division of Mechanics (Germany)
“Eulerian elastoplasticity: basic issues, perspectives and consistency criteria”
(Co-authors: H. Xiao, A. Meyers)
Session Lectures:
11.40 - 12.00 Dr A. Meyers - Ruhr-University Bochum, Division of Mechanics (Germany)
“Eulerian elastoplasticity: consistent flow theory”
(Co-authors: H. Xiao, O. Bruhns)
12.00 - 12.20 A. Kossa - Budapest University of Technology and Economics,Department of
Applied Mechanics (Hungary)
1
“Using logarithmic stress rate in computational single crystal elastoplasticity”
(Co-author : L. Szabó )
12.20 - 12.40 Dr Z. Nowak - IFTR PAS, Warszawa (Poland)
„Viscoplasticity of nanometals based on Burzyński yield condition”
(Co-authors: K. Korbel, P. Perzyna, R. B. Pęcherski)
12.40 – 13.00 Dr A. Tourabi - Laboratoire 3S, Domaine Universitaire, Grenoble (France)
“On viscoelastoplastic constitutive pattern of fabric materials”
(Co-authors: W. K. Nowacki, G. Bles)
13.00 – 15. 00 Lunch
Section MS&O - Room C
Chairman - Prof. W. Gutkowski, IFTR, Warszawa, (Poland)
Sectional Lecture
11.10 - 11.40 Prof. T. Burczyński - Silesian University of Technology, Department for
Strength of Materials and Computational Mechanics, Gliwice (Poland)
“Evolutionary topology optimization of 2D and 3D solid bodies”
(Co-authors: A. Poteralski , M. Szczepanik)
Session Lectures:
11.40 - 12.00 Prof. K. Dems - Technical University of Łódź, Department of Technical
Mechanics, Łódź (Poland)
“Application of path-independent integrals in sensitivity analysis, optimization and
identification for transient heat problems”
(Co-author : Z. Mróz )
12.00 – 12.20 Prof. T. Lewiński - Warsaw University of Technology, Warsaw, (Poland)
“On Michell cantilevers supported on an edge of a trapezoidal domain”
(Co-author : G. I. N. Rozvany)
12.20 – 12.40 Prof. D. Bojczuk - Kielce University of Technology, Faculty of Management
and Computer Modelling, Kielce (Poland)
“Some aspects of optimal design of plates by approaches based on topological derivative”
(Co-author: W. Szteleblak)
12.40 – 13.00 Dr R.Korycki, University of Lodz, (Poland)
“Sensitivities of state fields in the heat and mass transfer problem within the textile
structures”
(Co-author: K. Dems)
13.00 – 15. 00 Lunch
Section GEOM - Room D
Chairman - Prof. Z. Mróz, IFTR, Warszawa, (Poland)
Sectional Lecture
11.10 – 11.40 Prof. J. Tejchman - Gdańsk University of Technology, Faculty for Civil and
Environmental Engineering, Gdańsk (Poland)
“Effect of a spatially correlated random distributions of initial void ratio on shear zone
formation”
(Co-author: J. Górski)
Session Lectures:
11.40 – 12.00 Dr J. Rojek – IFTR, PAS, Warszawa, Poland
“Combined discrete/finite element modeling of geotechnical problems”
12.00 – 12.20 Prof. S. Pietruszczak - McMaster University, Hamilton, Ontario (Canada)
“Modeling of chemo-mechanical interaction in chalk”
(Co-authors: D. Lydzba, J. F. Shao)
12.20 – 12.40 Prof. J.S. Leszczynski - Czestochowa University of Technology, Institute of
Mathematics and Computer Science, Częstochowa (Poland)
“A discrete model of the dynamics of granular cohesive flows”
(Co-author: M. Ciesielski)
13.00 – 15. 00 Lunch
- Afternoon Plenary Session Room A
Chairman - Prof. H. Petryk, IFTR, Warszawa, (Poland)
15.00 - 15. 50 General Lecture
Prof. A. Klarbring – Linköping University, Division of Mechanics (Sweden)
“Residual stresses in arteries”
(Co-authors : T.Olsson, J.Stålhand)
- Afternoon Sectional Sessions Section MICR - Room A
Chairman - Prof. H. Petryk, IFTR, Warszawa, (Poland)
Sectional Lecture
16.00 – 16.30 Prof. D. Gross - Institute of Mechanics, TU Darmstadt (Germany)
“Interaction of defects in piezoelectric materials: recent results”
(Co-author: R. Mueller)
Session Lectures:
16.30 – 16.50 M. Kursa – IFTR, PAS, Warszawa (Poland)
“Modelling of elastic-plastic behaviour of metal crystals by incremental energy minimization”
(Co-author: H. Petryk)
16.50 – 17.10 Coffee Brake
Chairman - Prof. R. Pyrz, Aalborg University, (Denmark)
17.10 – 17.30 M. Touboul - LMPM (UMR CNRS 6617), Poitiers (France)
“A non classical scale transition for a class of viscoelastic particulate composites at finite
deformation”
(Co- authors: C.Nadot-Martin, A. Dragon and A.Fanget)
17.30 – 17. 50 Dr R. Staroszczyk - Institute of Hydro-Engineering, PAS, Gdańsk (Poland)
“On the anisotropy of polar ice”
17.50 – 18.10 Dr S. Tsutsumi – Kyushu University, Department of Marine System Eng.,
Fukuoka (Japan)
“Anisotropic response predicted by multiscale analysis introducing granular element method”
(Co-authors: K. Kaneko , M. Toyosada , K. Hashiguchi)
Section SHELL - Room B
Chairman – Dr K. Wiśniewski, IFTR, Warszawa, (Poland)
Sectional Lecture
16.00 – 16.30 Prof. W. Pietraszkiewicz - Institute of Fluid-Flow Machinery, PAS, Gdańsk
(Poland)
“On the local symmetry group in the general theory of elastic shells”
(Co-author: V. A Eremeyev)
Session Lectures:
16.30 – 16.50 V. Konopińska – Institute of Fluid-Flow Machinery, PAS, Gdańsk (Poland)
“Exact resultant equilibrium conditions for intersecting shells”
(Co-author: W. Pietraszkiewicz)
16.50 – 17.10 Coffee Brake
17.10 – 17.30 Dr W. Witkowski - Gdańsk University of Technology, Gdańsk (Poland)
“On the use of enhanced strain formulation in 6-field nonlinear shell theory with asymmetric
strain measures”
(Co-author: J. Chróścielewski)
17.30 – 17.50 Dr R. Mania - Technical University of Łódź, Department of Strength of
Materials & Structures, Łódź (Poland)
“Multi modal analysis of dynamic response of thin-walled plated structures”
(Co-authors: T. Kubiak T., Z. Kołakowski, K. Kowal-Michalska)
17.50 – 18.10 Dr S. Opoka - Institute of Fluid-Flow Machinery PAS, Gdańsk, (Poland)
“Influence of boundary conditions on axial buckling load of circular cylindrical shell”
Section TMPT - Room C
Chairman – Prof. W. K. Nowacki, IFTR, Warszawa, (Poland)
Sectional Lecture
16.00 – 16.30 Prof. Ch. Lexcellent - Laboratoire de Mécanique Appliquée Raymond Chaléat
FEMTO-ST, Besançon (France)
“Thermodynamics of close or open two phase systems: from shape memory alloys to metalhydrogen systems”
(Co-author: G. Gondor)
Session Lectures:
16.30 – 16.50 Dr A. Ziółkowski – IFTR, PAS, Warszawa (Poland)
“Experimental verification of fundamental theoretical assumptions underlying macroscopic
theory of pseudoelasticity”
16.50 – 17.10 Coffee Brake
Chairman – Prof. Ch. Lexcellent - Laboratoire de Mécanique Appliquée Raymond Chaléat
FEMTO-ST, Besançon (France)
17.10 – 17.30 Prof. H. Tobushi - Aichi Institute of Technology Department of Mechanical
Engineering, Toyota, (Japan)
“Shape memory composite with SMA and SMP”
(Co-authors: S. Hayashi, K. Hoshio)
17.30 – 17.50 Dr W. Rączka - AGH University of Science and Technology, Department of
Process Control, Kraków (Poland)
“SMA linear actuator - testing and modeling”
(Co-author: M. Sibielak )
17.50 – 18.10 Dr E. A. Pieczyska – IFTR, PAS, Warszawa (Poland)
“Thermomechanical properties of TiNi shape memory alloy - transformation induced effects”
(Co-authors: S. P. Gadaj, W. K. Nowacki, H. Tobushi)
Section BIO - Room D
Chairman – Prof. R. Będziński, Wroclaw University of Technology, (Poland)
Sectional Lecture
16.00 – 16.30 Dr K. Ścigała - Wrocław University of Technology, Faculty of Mechanical
Engineering, Wrocław, Poland
“Adaptation of bone tissue around the joint implants to mechanical loading”
Session Lectures:
16.30 – 16.50 Dr T. Goldmann – CTU in Prague, Faculty of Mechanical Engineering, Prague
(Czech Republic)
“Determination of the cortical bone elastic coefficients by the ultrasonic wave inversion- an
approach of the wave propagation through the curvilinear anisotropic sample”
(Co-authors: H. Seiner, M. Landa)
16.50 – 17.10 Coffee Brake
17.10 – 17.30 Prof. M. Kaczmarek - Kazimierz Wielki University, Bydgoszcz (Poland)
“Modeling of scattered waves in trabecular bones”
(Co-authors: M. Pakuła, J. Kubik)
17.30 – 17.50 Dr S. Szotek - Wrocław University of Technology, Faculty of Mechanical
Engineering, Wrocław (Poland)
“Analysis of the occiput bone deformation- using optical method”
(Co-authors: R. Będziński, K. Ścigała, C. Pezowicz, L. Ciupik, T. Turek, K. Maksymowicz)
17.50 – 18.10 Prof. E. Majchrzak – Silesian University of Technology, Gliwice (Poland)
“Simultaneous identification of biological tissue thermal parameters”
(Co-author: B. Mochnacki)
18.10 – 18.30 Dr. M. Stańczyk –IFTR, PAS, Warszawa (Poland)
“Comparison of selected vascular models of heat transfer in perfused tissues”