Untitled - International Symposium on Mechanics of Materials and

Untitled - International Symposium on Mechanics of Materials and

Organizers
Polish Society of Theoretical and Applied Mechanics, Branch of Bialystok
Section on Mechanics of Materials, Committee on Mechanics, Polish Academy of Sciences
Department of Mechanics and Applied Computer Science, Faculty of Mechanical Engineering, Bialystok University of Technology
Honorary Patronage
Committee on Mechanics, Polish Academy of Sciences
Scientific Committee
Prof. Zenon Mróz - chairman
Prof. Jan Awrejcewicz
Prof. Jerzy Bajkowski
Prof. Romuald Będziński
Prof. Tadeusz Burczyński
Prof. Mykolas Daunys
Prof. Jan R. Dąbrowski
Prof. Grzegorz Glinka
Prof. Krzysztof Gołoś
Prof. Zdzisław Gosiewski
Prof. Witold Gutkowski
Prof. Jerzy Kaleta
Prof. Wacław Kasprzak
Prof. Mark Kachanov
Prof. Jan Kiciński
Prof. Janusz Kowal
Prof. Slava Krylov
Prof. Krzysztof Kurzydłowski
Prof. Roman M. Kushnir
Prof. Mieczysław Kuczma
Prof. Andrzej Litewka
Prof. Tadeusz Łagoda
Prof. Stanisław Matysiak
Prof. Krzysztof Marchelek
Prof. Arkadiusz Mężyk
Prof. Jarosław Mikielewicz
Prof. Gennady Mishuris
Prof. Alexander Movchan
Prof. Natasha Movchan
Prof. Andrzej Neimitz
Prof. Tadeusz Niezgoda
Prof. Wiesław Ostachowicz
Prof. Volodymyr Panasyuk
Prof. Ryszard Parkitny
Prof. Henryk Petryk
Prof. Enrico Radi
Prof. Bogdan Sapiński
Prof. Mykhailo Savruk
Prof. Jerzy Sawicki
Prof. Andrzej Seweryn
Prof. Igor Sevostianov
Prof. Vadim Silberschmidt
Prof. Błażej Skoczeń
Prof. Anatoly Sviridenok
Prof. Jacek Skrzypek
Prof. Leonid Slepyan
Prof. Kazimierz Sobczyk
Prof. Feliks Stachowicz
Prof. Józef Szala
Prof. Gwidon Szefer
Prof. Andrzej Tylikowski
Prof. Czesław Woźniak
Prof. Jozef Zivčak
(IFTR PAS - Warsaw)
(Technical University of Lodz)
(Warsaw University of Technology)
(Wroclaw University of Technology)
(IFTR PAS - Warsaw)
(Kaunas Univ. Tech., Lithuania)
(Bialystok University of Technology)
(University of Waterloo, Canada)
(Warsaw University of Technology)
(Bialystok University of Technology)
(IFTR PAS - Warsaw)
(Wroclaw University of Technology)
(Wroclaw University of Technology)
(Tufts University, USA)
(IFFM PAS - Gdansk)
(AGH Univ. Science Techn. - Cracow)
(Tel Aviv University, Israel)
(Warsaw University of Technology)
(IAPMM NASU, Lviv, Ukraine)
(Poznan University of Technology)
(Poznan University of Technology)
(Opole University of Technology)
(University of Warsaw)
(West Pom. Univ. Techn. - Szczecin)
(Silesian Univ. Techn. - Gliwice)
(IFFM PAS - Gdansk)
(Aberystwyth University, UK)
(University of Liverpool, UK)
(University of Liverpool, UK)
(Kielce University of Technology)
(Military University of Technology)
(IFFM PAS - Gdansk)
(IPM NASU, Lviv, Ukraine)
(Czestochowa University of Technology)
(IFTR PAS - Warsaw)
(University of Modena and Reggio Emilia, Italy)
(AGH Univ. Science Techn. - Cracow)
(Bialystok University of Technology)
(Cleveland State University, USA)
(Bialystok University of Technology)
(New Mexico State University, USA)
(Loughborough University, UK)
(Cracow University of Technology)
(RCRSP NASB, Grodno, Belarus)
(Cracow University of Technology)
(Tel Aviv University, Israel)
(IFTR PAS - Warsaw)
(Rzeszow University of Technology)
(Univ. Techn. Life Scienc. - Bydgoszcz)
(Cracow University of Technology)
(Warsaw University of Technology)
(Czestochowa University of Technology)
(Technical University of Kosice)
Organizing Committee
Prof. Andrzej Seweryn - chairman
PhD. Adam Tomczyk – secretary
Prof. Gennady Mishuris
Prof. Feliks Stachowicz
DSc. Agnieszka Dardzińska-Głębocka
PhD. Łukasz Derpeński
PhD. Jarosław Szusta
MSc. Anna Falkowska
MSc. Małgorzata Zdrodowska
Correspondence
Department of Mechanics and Applied Computer Science
Faculty of Mechanical Engineering
Bialystok University of Technology
Wiejska 45C Str.
15-351 Bialystok, Poland
fax: +48 85 7469210
tel. +48 85 7469221, +48 85 7469206
e-mail: [email protected]
www.mechanika.materialow.pb.edu.pl
SUNDAY, MAY 31, 2015
- 1700
Arrival and registration
1800-
Bonfire supper
MONDAY, JUNE 1, 2015
800-900
Breakfast
930-950
Opening of VIII-th International Symposium on Mechanics of Materials and Structures and Fracture and
Fragmentation in Science and Engineering Conference (Speech: Rector of Białystok University o Technology,
Chairman of Scientific Committee, Chairman of Organizing Committee)
Plenary session A1 (in English)
chairman: prof. Zenon Mróz
Invited lectures
950-1030
1030-1110
1110-1150
1150-1220
1. Kachanov M., Sevostianov I.: Contact of rough surfaces, and contacts of complex shapes: compliance,
conductivity and cross-property connections
2. Stupkiewicz S.: Micromechanics of contact interfaces
3. Kubiak T.: Buckling and postbuckling behaviour of thin-walled laminate beam-columns
Coffee break
Plenary session A2 (in English)
chairman: prof. Gwidon Szefer
1. Abeygunawardane-Arachchige G.A., Silberschmidt V.V.: Crack growth in notched specimens under
repetitive impacts
2. Fletcher J., Demirci E.: Numerical analysis of failure mechanisms of pCBN cutting tools
1220-1320
3. Nieves M., Mishuris G., Slepyan L., Zagnetko A.: Dynamic fracture of flexural structured media and the
progressive collapse of bridges
4. Peck D., Mishuris G., Wróbel M., Petrov Yu.: An improved estimate for threshold fracture energy in
solid particle erosion
1330-1430
Lunch
Plenary session A3 (in English)
chairman: prof. Stanisław Stupkiewicz
1. Wang M., Gao X., Abdel-Wahab A., Li S., Zimmermann E.A., Riedel Ch., Busse B., Silberschmidt V.V.:
Crack propagation in cortical bone tissue under dynamic loading
1430-1530
2. Arslan I.Z., Cansiz E., Turan F.: Application of a maxillofacial surgery instrument manufactured by laser
sintering in the sagittal split osteotomy
3. Nekouie V., Roy A., Silberschmidt V.: Deformation behaviour of Zr-Cu-based bulk metallic glass
4. Kushch V., Sevostianov I., Mishuris G.: Maxwell homogenization scheme as a rigorous method of
micromechanics
Plenary session A4 (in English)
1.
chairman: prof. Tomasz Kubiak
Coles L., Roy A., Silberschmidt V.V.: Finite-element modelling of ultrasonically assisted turning
2. O'Neill J., Selsil Ö., McPhedran R.C., Movchan A.B., Movchan N.V., Henderson-Moggach C.: Active
cloaking of inclusions for membrane and elastic flexural waves in resonant regimes
1530-1630
3. Vitucci G., Argatov I., Mishuris G.: Modelling of transversally isotropic, transversally homogeneous
biphasic cartilage layer
4. Bąk Ł., Noga S., Stachowicz F.: The experimental investigation of the screen operation in the parametric
resonance conditions
Plenary session A5 (in English)
chairman: prof. Mark Kachanov
1. Falsafi J., Demirci E., Silberschmidt V.V.: Assessment of residual formability in sheet metal products:
towards design for remanufacturing
1630-1730
2. Wróbel M., Mishuris G.: Hydraulic fracture: a crack of special care
3. Perkowska M., Wróbel M., Mishuris G.: Hydraulic fracture: crack propagation induced by shearthinning fluid
4. Hakimi L., Chabaat M.: On post cracking of masonry elements and determination of fracture parameters
1800-
Ship trip (with supper)
TUESDAY, JUNE 2, 2015
800-900
Breakfast
Plenary session B1 (in English)
chairman: prof. Feliks Stachowicz
1. Ziętek G., Mróz Z.: Coupled elastic-plastic deformation process and martensitic transformation:
constitutive model and its application
900-1000
2. Bohdal Ł.: Application of a mesh-free continuum method for simulation of trimming of aluminum
autobody sheet
3. Witek L., Bednarz A., Stachowicz F.: Fatigue analysis of compressor blades with preliminary defect
4. Czarnocki P., Czajkowska K.: Delamination resistance of laminate made with VBO MTM46/HTS
prepreg
Plenary session B2 (in English)
chairman: prof. Gennady Mishuris
1. Nosko O., Nagamine T., Mori H., Sato Y.: Friction-induced oscillations of a non-asbestos organic pin
sliding on a steel disc
1000-1100
2. Doroszko M., Seweryn A.: Numerical modeling of the deformation behavior of sintered 316L
mesostructures using X-ray microtomography
3. Kecik K., Ciecielak K., Zaleski K.: Damage detection of composite milling process using recurrence plots
technique
4. Veselykha V., Bogdanovich A.: About the life assessment of pipes of linear part of the pipeline on the
basis of the deformation criterion of the crack growth resistance
1100-1130
Coffee break
Plenary session B3
chairman: prof. Jacek Skrzypek
1. Stasiuk P., Karolczuk A., Kuczko W.: Analysis of correlation between stresses and fatigue lives of
welded steel specimens based on real three-dimensional weld geometry
1130-1230
2. Karolczuk A.: Ratcheting simulation in a titanium-steel bimetallic plate based on the Chaboche hardening
model
3. Pawliczek R., Lachowicz C.T.: Modelling of the stress-strain relationship for specimens made of S355J0 steel
subjected to bending block loading with mean load
4. Kulesa A., Kurek A., Łagoda T., Achtelik H., Kluger K.: Lifetime of steel in strain controlled cyclic
bending
Plenary session B4
chairman: prof. Tadeusz Łagoda
1. Grześ P., Oliferuk W., Adamowicz A., Kochanowski K., Wasilewski P., Jewtuszenko O.: Temperature
field evolution in the disc brake with the pad made of the friction material with thermal diffusivity
determined by means of pulsed IR thermography – theoretical and experimental approach
1230-1330
2. Sulym H., Pasternak I., Tomashivskyy M.: Boundary integral equations for an anisotropic bimaterial
with thermally imperfect interface and internal inhomogeneities
3. Kaczyński A.: On the thermoelastic anticrack problem in a transversely isotropic space
4. Bogdanovich A., Yelovoy O., Sosnovskiy L., Komissarov V., Tyurin S.: Local wear-fatigue damages
1330-1430
Lunch
TUESDAY, JUNE 2, 2015
Poster session B6
chairman: prof. Stanisław Mroziński, prof. A. Karolczuk
1500-1700
1. Bajgrowicz M., Kmiecik B., Detyna J.: Potential use of hydrogel contact lenses in drug delivery
2. Bardziński P.J., Kopcewicz M., Musiał A., Idzikowski B., Rybaczuk M.: On the structure and magnetic
properties alteration by changing the cooling rate of melt-spun Fe74Hf4Ta1Cu1Gd1LaxSi15 − xB4 (x = 2, 4) alloys
3. Barsukov V. V., Tarasiuk W., Krupicz B., Barsukov V. G.: Calculate model of critical states for surface
layers of compacted disperse materials under action of lateral rest pressure
4. Biglar M., Gromada M., Stachowicz F., Trzepieciński T.: Synthesis of barium titanate piezoelectric
ceramics for multilayer actuators (MLAs)
5. Błachut A., Czapliński T., Maciejewski Ł., Ziętek G.: Fatigue testing of CFRP composites
6. Bocian M., Lesiuk G., Szata M.: Dynamics of the fatigue cracks growth in an old steels manufactured at
the turn of the 19th and 20th century
7. Bocian M., Mech R., Przybylski M., Tkaczyk M.: Change of damping properties caused by
recrystallization of iron alloy
8. Bodniewicz D., Tabota A.: Testing and modelling of the energy absorption of thin-walled structures with
a specified internal pressure under the quasi-static compression
9. Niesłony A., Bohm M., Łagoda T., Cianetti F.: The use of spectral method for fatigue life assessment for
non-gaussian random loads
10. Bohojło-Wiśniewska A.: Heat and mass transfer between a head of chinese cabbage and humid air under
local thermal non-equlibrium condition
11. Bucior M., Gałda L., Stachowicz F., Zielecki W.: The effect of technological parameters on intensity of
shot peening process of 51CrV4 steel
12. Chodór J., Kałduński P., Żurawski Ł.: Investigations on the chip shape and its upsetting and shortening ratios
in the process of cylindrical and face milling and the simulation of the process with the use of FEM
13. Cieślak M., Derlukiewicz D.: Determining the causes of the arm member fractures of the brokk 90
demolition machine with use of high speed camera and finite element method
14. Czernuszewicz A., Ćwik J., Kaleta J., Lewandowski D.: Characterization of NIMNIN alloy for
magnetobarocaloric heat pump application
15. Drewniak J., Hojdys L.: Software for determining the fatigue life of gears with nonstationary Bogdanov Kozin model
16. Dybcio P., Barnat W.: Numerical simulation of on multilayer shield subjected to IED blast
17. Falkowska A., Seweryn A.: Impact of technological parameters on the mechanical properties of porous
sintered 316L stainless steel
18. Faszynka S., Lewandowski J., Rozumek D.: Analysis of stress and strain in specimens with rectangular
section subjected to torsion and bending with torsion
19. Gorzelańczyk P.: Fitnet european procedures in teaching of mechanics and design of machines and other
associated faculties
20. Jewtuszenko O., Grześ P.: Effect of the relative dimensions of the pad and the disc on the temperature
during single braking
21. Kałdunski P., Chodór J.: Computer simulation and numerical analysis of the drawpiece shaping process,
for the two types of sheet metal bonded each other
22. Kecik K.: Application of shape memory alloy in harvesto-absorber system
23. Klekotka M., Dabrowski J.R.: Fretting processes of Ti-Al-V - Al2O3 friction pairs
24. Kmiecik B., Bajgrowicz M., Detyna J.: Mathematical modeling of the mechanical bahaviour of skin
25. Krzesiński G., Wymysłowski P., Boczkowska A.: Parametric FE modelling of mechanical, electrical and
thermal properties of nanocomposite structure
26. Krzyżak D., Robak G., Łagoda T.: Determination of effective length for 40 HM steel by use of conception
of non-local line method
27. Kulchytsky-Zhyhailo R., Bajkowski A.: Axi-symmetrical problem of the surface of halfspace with
gradient coating under thermal loading
28. Kulchytsky-Zhyhailo R., Bajkowski A.: Stresses in gradient coating caused by the loading applied in
elliptical area – analytical solution
29. Smyrak B., Knych T., Mamala A., Korzeń K., Nowak A., Jabłoński M., Gniełczyk M., Jurkiewicz B.: The
main exploitation problems of overhead conductors
30. Sviridenok A., Krautsevich A. Kaczyński R., Rabinovich O., Shashura L.: The effect of CNM/SiO2
fillers on adhesion strength of ethylene-vinyl acetate copolymer
31. Uścinowicz R.: Effect of temperature on strength of single lap Al/Cu bimetallic joint
1700-1900
Gondola ride along the Rospuda Valley – course I
1830-1930
Supper
1930-2130
Gondola ride along the Rospuda Valley – course II (if necessary)
WEDNESDAY, JUNE 3, 2015
800-900
Breakfast
Plenary session C1
chairman: prof. Jerzy Kaleta
1. Mackiewicz A., Frątczak R., Sławiński G., Będziński R.: Numerical analysis of the risk of neck injuries
caused by IED explosion under the vehicle in military environments
900-1000
2. Cichański A., Nowicki K., Topoliński T.: Stiffness correction of sample for trabecular bone structure
modelling method
3. Nowicki K., Topoliński T.: About a certain method to determine fatigue life of biological materials
4. Sherbakov S., Sosnovskiy L.: Manipulation of nanoobjects by electromagnetic and van der Waals forces
Plenary session C2
chairman: prof. Romuald Będziński
1. Korzeń K., Knych T., Smyrak B.: Creep of overhead conductors in nonstationary temperature and stress
working conditions
2. Hernik Sz., Dudek P.: Approximation of mechanical modules of long fiber unidirectionally reinforced
compsites by the use of a hybrid rule between Voigt and Reuss estimates
1000-1115
3. Ganczarski A., Szubartowski D.: On the stress free deformation of linear FGM interface under constant
temperaturę
4. Mroziński S., Egner H., Egner W., Sulich P.: Modeling thermomechanical fatigue of P91 steel
5. Bohm E., Kurek M., Łagoda T.: Fatigue life assessment with the use of exponential and power law
functions for different load sequences
1115-1145
Coffee break
Plenary session C3
chairman: prof. Artur Ganczarski
1. Kotowski P.: Fractal characteristics of cracks in selected steels and ceramics
1145-1245
2. Pała R., Dzioba I.: Analysis of stress distribution in front of the crack tip in the elements of modified and
unmodified cast steel G17CrMo5-5
3. Sieja-Smaga E., Kawecki A., Knych T., Mamala A., Kiesiewicz G., Kwaśniewski P.: High-strength and
high-conductivity CuAg5 alloy for high field magnet applications
4. Prezentation of EC Test Systems products
1330-1430
Lunch
WEDNESDAY, JUNE 3, 2015
Poster session C4
1500-1730
przewodniczący: prof. Piotr Czarnocki, prof. W. Barnat
1.
2.
3.
4.
5.
6.
Adamowicz A.: Thermal stresses in disc brake during repetitive braking
Dardzińska A., Romaniuk A.: How can data mining help in some mechanics data analysis?
Derpeński Ł., Seweryn A.: Ductile fracture of elements with notches under complex loading state
Dzienis P., Mosdorf R.: The influence of nozzle diameter on gas bubbles formation in water
Dzienis P., Mosdorf R., Wyszkowski T.: Air bubble chain formation in mineral and synthetic oils
Grzybowski H., Mosdorf R.: Analysis of temperature fluctuations during flow boiling inside
minichannel using wavelet decomposition method
7. Kulchytsky-Zhyhailo R., Matysiak S.J., Perkowski D.M.: Axisymmetric thermoelasticity problem of
half-space with temperature dependent properties locally heated on boundary surface
8. Kurek M., Łagoda T.: Orientation of critical plane in calculation of lifetime of selected metals
9. Kuz I., Kuz O., Sulym H.: Stress-strain state of elastic plate with an arbitrary smooth notch
10. Lipski A.: Accelerated determination of fatigue limit and S-N curve by means of thermographic method
for X5CrNi18-10 steel
11. Lis I., Bogdanovich A.: Durability prediction of metal-to-metal active system operating under mechano–
sliding fatigue
12. Mech R., Kaleta J.: Influence of Terfenol-D powder volume fraction in magnetostrictive composites on
their magnetomechanical properies
13. Oszust M., Kamocka-Bronisz R., Pieniak D.: Influence of thermal fire conditions on the strength
properties of polymer compo-sites used for manufacturing of firefighting helmet
14. Pała T., Dzioba I., Gałkiewicz J.: Verification of strength of welded joints by Aramis video extensometer
15. Pieniak A., Walczak A., Niewczas A.M.: Comparative study of wear resistance of composite with microhybrid and nano-composite structure
16. Pyryev Yu., Pawlikowski M.: Finite element analysis of compression problem of two rollers
17. Rubanik V.V., Rubanik V.V.jr, Lesota A.V.: Influence of deformation on thermokinetic EMF under
direct phase transformation in TiNi alloys
18. Ryś M., Egner H.: Constitutive and numerical modeling of damage in two-phase materials
19. Savruk M.P., Kazberuk A.: Stress concentration at the vertex of sharp V-notch in orthotropic plane
20. Kazberuk A., Savruk M.: Stresses at the edge of rounded notch in the orthotropic plate (mode I)
21. Kazberuk A., Savruk M., Seweryn A.: Stress intensity factors at corner points of chevron crack in
orthotropic plate
22. Savula Y., Turchyn Y., Dyakonyuk L.: Numerical research of the problem of mass transfer in thin layer
23. Sevostianov I., Skrzat A., Stachowicz F.: Estimation of effective properties of microstructures with pores
24. Sokołowski D., Barnat W.: Numerical model of aramid fabric conducted on the basis of a puncher test
25. Sulym H., Timar I., Turchyn I.: Transient vibrations of an elastic cylinder inserted in the elastic medium
26. Szczurek A., Krzak J., Kaleta J.: Reduction of CO2 permeability through thickening of polymer structure,
by sol-gel layer
27. Szusta J., Seweryn A.: Fatigue life prediction of materials at elevated temperatures
28. Szymczyk E., Puchała K., Jachimowicz J.: FE analysis of mechanical joints in composite structures
29. Tomasiewicz J., Czarnocki P.: Experimental and finite element analysis of the mechanical behaviour of
non-adhesive metal/CFRP form locked joint
30. Tomczyk A.: Stress intensity ahead of a crack tip in a half-space loaded by rigid stamp
31. Trzaska M., Barnat W., Kiczko A.: The infuence of thrust generated by rotation of the propeller-driven
car engine on a construction of an engine stand
32. Yevtushenko A., Kuciej M., Och E.: Solving thermal problem of friction by method of successive
approximations for materials with arbitrary nonlinearity
33. Och E., Kuciej M., Yevtushenko A.: Using method of lines to solve nonlinear thermal problem of friction
for braking of thermally sensitive materials
1900-
Supper
THURSDAY, JUNE 4, 2015
800-900
Breakfast
900-1100
Leaving the hotel
ORGANIZING NOTE
Time limit for invited lecture: 30 min. + 10 min. for discussion
Time limit for plenary presentation: 10 min. + 5 min. for discussion
Organizers provide:
 projector + computer (software: PDF Reader, Microsoft Office - Power Point, Word, Excel)
 poster area (maximal dimensions: 100  120 cm)
The hotel Oficerski Yacht Clubu R.P. Pacific in Augustow
Hotel „Pacific”
1 Kardynala Wyszynskiego Str.
Augustow
tel.: (087) 6433496