Modern polymeric materials for environmental applications. Vol. 6

Modern polymeric materials for environmental applications. Vol. 6

Modern polymeric materials for environmental applications. Vol. 6, 6th
International Seminar Kraków, 27-29 April 2016 including COST MP1206
Worshop 'Electrospinning vs traditional polymer processing methods :
comparison of innovative technical applications' / edited by Krzysztof
Pielichowski. – Tarnow, 2016
Spis treści
Preface
I
Contents
III
Electrospun nanofibrous filtration membranes for water purification
Application
Elif Gamze Aygün, Nagihan Okutan, Filiz Altay
1
Synthesis and properties of magnetic nanoparticles stabilized
with nanogold shells
Katarzyna Bialik-Wąs, Bożena Tyliszczak, Dorota Walczyk,
Mieczysław Zaczyk, Agnieszka Sobczak-Kupiec
11
Characterization of acrylic hydrogels containing chitosan and gold
nanoparticles
Katarzyna Bialik-Wąs, Bożena Tyliszczak, Magdalena Kulig,
Anna Drabczyk, Dagmara Malina, Agnieszka Sobczak-Kupiec
17
Liquid crystallinity in polymers - liquid crystalline polyurethane elastomers
Artur Bukowczan, Edyta Hebda, Krzysztof Pielichowski
23
UV ageing of polyurethane foams modified by polyhedral oligomeric
silsesquioxanes (POSS)
Artur Bukowczan, Edyta Hebda, Joanna Pagacz, Jan Ozimek,
Krzysztof Pielichowski
29
Effects of nanofillers on plant protein based bionanocomposites for food
packaging applications
Turgay Çetinkaya, Filiz Altay
35
Melamine Diborate - a New, Ecological Source of Oligoetherols
and Polyurethane Foams of Enhanced Thermal Stability and Low
Flammability
Ewelina Chmiel, Jacek Lubczak
47
Metasilicic Acid - a New Source of Oligoetherols and Polyurethane Foams
Ewelina Chmiel, Jacek Lubczak
57
Synthesis of the urethane-styrene copolymers through SARA ATRP
Paweł Chmielarz, Piotr Król
65
Elastomeric materials reinforced with cellulosic fibres
K. Diakowska, A. Masek, M. Zaborski
73
Studies on chitosan/beetosan - based hydrogels modified with Salvia
officinalis and bee pollen
Anna Drabczyk, Sonia Kudłacik, Katarzyna Bialik-Wąs, Bożena Tyliszczak
81
Synthesis and physicochemical properties of acrylic hydrogels modified
with starch
Anna Drabczyk, Bożena Tyliszczak, Krzysztof Pielichowski
89
Unconventional cross-linking method of polychloroprene rubber
Anna Dziemidkiewicz, Martyna Pingot, Krzysztof Strzelec,
Marian Zaborski
95
The influence of the initial pH on the sol-gel synthesis of resorcinolformaldehyde gels
Katarzyna Z. Gaca, Ewa Szefer
101
Effect of composition and preparation conditions on mechanical properties
of thermoplastic starch
F. Ivanič, I. Chodák
111
Polyurethane elastomers containing polyhedral silsesquioxanes. Thermal,
mechanical and biological characterization
Małgorzata Jancia, Edyta Hebda, Krzysztof Pielichowski
117
Monitoring of photocopolymerization of trimethylolpropane triacrylate
with glycidyl methacrylate using by fluorescence spectroscopy technique
Iwona Kamińska-Borek, Joanna Ortyl, Roman Popielarz
125
Molecular dynamics and thermal transitions in PDMS/CNTs nanocomposites
Panayiotis Ketikis, Stefanos Koutsoumpis, Lilianę Bokobza, Dimosthenis
Georgopoulos, Georgios Georgousis, Evangelia Kontou, Apostolos Kyritsis,
Polycarpos Pissis
133
The study of properties of polyamide 610/microfibrillated cellulose
nanocomposites
Paulina Konieczna, Agnieszka Leszczyńska, Krzysztof Pielichowski
143
Impact of POSS particles on morphology, thermal properties and molecular
dynamics of polyurethane elastomers based on HDI
Stefanos Koutsoumpis, Konstantinos N. Raftopoulos, Jan Ozimek,
Polycarpos Pissis, Edyta Hebda, Christine M. Papadakis,
Krzysztof Pielichowski
151
Geometry of nanospun fibers
Kozłowski Marek
161
The effect of different additives on selected properties of polypropylene
fibers
Vladimíra Krmelová, Maxim Puchnin, Iveta Papučová, Katarína Móricová
169
Polyurethane cationomers modified by polysiloxane
Bożena Król, Kinga Pielichowska, Piotr Król, Paweł Chmielarz
175
Acrylic bone cements modified with PEG/chitosan systems
Klaudia Król, Paulina Chylińska, Kinga Pielichowska
183
Attainment and physicochemical analysis of chitosan/beetosan based
hydrogel matrices incorporated with caffeine
Sonia Kudłacik, Anna Drabczyk, Katarzyna Bialik-Wąs, Bożena Tyliszczak
191
Synthesis and characterization of hydrogels with chitosan containing
caffeine
Sonia Kudłacik, Anna Drabczyk, Katarzyna Bialik-Wąs, Bożena Tyliszczak
199
The influence of bio-components on the flammability of porous
polyurethane materials
Maria Kurańska, Aleksander Prociak, Ugis Cabulis, Mikelis Kirpluks
207
The influence of water absorption on PA 10.10/flax composites
Paulina Kuźniar, Stanisław Kuciel, Anna Kufel
213
Modification of Oligoetherols with Carbazole and Adenine Rings
for Obtaining of Polyurethane Foams with Reduced Flammability
Renata Lubczak, Dominik Szczęch
219
Flexible polyurethane foams synthesized with different bio-polyols
Elżbieta Malewska, Paulina Budny, Aleksander Prociak
231
Chitosan based composites reinforced with silver modified hydroxy apatite
Dagmara Malina, Klaudia Pluta, Agnieszka Sobczak-Kupiec
239
Solar irradiation effects on the properties of ethylene-norbornene
composites containing solvent dyes and stabilizers
Anna Marzec, Marian Zaborski, Zygmunt Boruszczak
245
Elastomeric nanocomposites for sensors and actuators application
Mária Omastová
255
The influence of POSS nanoparticles on poly(tetramethylene ether) glycol
crystallization
Jan Ozimek, Edyta Hebda, Krzysztof Pielichowski
263
Processing and characterisation of modern polyurethane powder clear
coatings
Barbara Pilch-Pitera
275
Characteristics and properties of polymer-ceramic based despersions
Klaudia Pluta, Dagmara Malina, Agnieszka Sobczak-Kupiec,
Bożena Tyliszczak, Katarzyna Bialik-Wąs
283
Possibilities of PLA as food packaging material- nano-reinforcement
and electrospinning as future perspective
Tanja Radusin, Aleksandra Miletić, Ivan Ristić, Branka Pilić
289
Architecture effects on the morphology and segmental dynamics
in Polyurethane - POSS organic inorganic hybrids
Konstantinos N. Raftopoulos, Stefanos Koutsoumpis, Edyta Hebda,
Christine M. Papadakis, Krzysztof Pielichowski, Polycarpos Pissis
297
Epoxy-polyurethane materials - novel products as an answer for growing
awareness for environmental issues and consumers expectations
Anna Sienkiewicz, Piotr Czub
307
Attainment and properties of composites based on polymeric matrices
reinforced with bioactive calcium phosphates
Agnieszka Sobczak-Kupiec, Klaudia Pluta, Katarzyna Bialik-Wąs,
Dagmara Malina, Bożena Tyliszczak
317
Structure-property relationships in thermoplastic polyurethane
nanocomposites containing POSS molecules
Krzysztof Stafin, Agnieszka Leszczyńska, Krzysztof Pielichowski
325
Carbon nanofibers as reinforcing filler in elastomer technology
Bolesław Szadkowski, Martyna Pingot, Marian Zaborski
335
Starch as a Substrate for Synthesis of Oligoetherols and Rigid
Polyurethane Foams
Dominik Szczęch, Renata Lubczak
341
Evaluation of cytotoxicity and physicochemical properties of chitosan based
hydrogels modified with gold nanoparticles
Bożena Tyliszczak, Katarzyna Bialik- Wąs, Dorota Walczyk,
Dagmara Malina, Agnieszka Sobczak-Kupiec
349
Synthesis and characterization of self-healing polymer matrices based
on A6ACA monomers
Bożena Tyliszczak, Katarzyna Bialik-Wąs, Jolanta Jaśkowska,
Anna Drabczyk, Sonia Kudłacik, Agnieszka Sobczak-Kupiec
355
Structure-properties relationships in vegetable oil based polyurethane
coating materials
Joanna Wojturska
361
Dose rate effects of gamma irradiation in ethylene-propylene terpolymer
T. Zaharescu, E.M. Lungulescu, A. M. Luchian
369
Radiation processing - a versatile procedure for the modification
of polymers
Traian Zaharescu
377
Magnetic liquids for polymeric pipe tightness
T. Zaharescu, L. Vékás, I. Borbath, A. M. Luchian
399
Author index
405
Subject index
407
oprac. BPK